Alaskan King Bed Frame Assembly
Welcome to bed.
How to assemble your bed frame
A screwdriver is required for assembly.
Please note that the number of slats included varies by size.
Step One
Lay out all pieces. Lean the headboard against a wall or have another person hold it up.
Step Two
Hook each side rail into the headboard one at a time. Then hook the footboard into the side rails.
Step Three
Screw the center support into the headboard and footboard.
Step Four
Screw the slats into the side rails.
How to care for your bed frame
One of the best ways to keep Crypton fabrics looking fresh is to brush off dirt before it becomes embedded in the fabrics and wipe up spills or clean soon after a stain occurs. The faster you clean spills and stains, the easier they can be to remove.
Vacuuming your bed frame weekly with a proper upholstery attachment is highly recommended for general maintenance of the fabric.
Have a spill? Try this spot cleaning method.
Most liquids simply roll off of Crypton fabrics, or they can be quickly blotted off the surface with a dry towel or sponge. The spot cleaning method of stain removal can be used for most light to medium stains, such as coffee, soda, crayon, and ketchup. Be careful to brush lightly since fibers can be broken or matted during the cleaning process.
- Before spot cleaning, blot up liquids on the surface with a clean, soft towel and brush off any loose dirt.
- Prepare a cleaning solution of 1/4 tsp mild, enzyme detergent, such as Tide®, Woolite® or Dawn® dishwashing liquid, per 1 cup of lukewarm water.
- Apply the cleaning solution using a misting spray bottle. Do NOT oversaturate when applying the cleaning solution.
- Work the solution into the affected area by lightly scrubbing the area with a sponge or soft bristle brush. Make sure to work from the outside of the stain inward so as not to spread the stain and rinse your sponge or brush frequently.
- Allow cleaning solution to soak into the fabric.
- Rinse thoroughly to remove all soap residues, as residues will attract dirt. Blot excess moisture with a clean, soft towel or sponge.
- Repeat steps 3-6 as needed.
- Allow fabric to air dry.